There is a pause between each series of flashes. Gently pull the feed arm guide [A] on the left side frame forward, then remove the large gear. If the problem is an Error Code 92, replace the Print Cartridges. Disconnect the paper feed motor and power supply connectors from the system board. Be sure the thermal sensor is connected to J7 on the system board. When reinstalling the system board, it is easier to insert the printhead cables in the three connectors prior to installing the board.

Uploader: Kazigar
Date Added: 22 January 2012
File Size: 18.71 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 48415
Price: Free* [*Free Regsitration Required]

Start Service error indications show as a series of flashes of the Power light.

You can obtain additional copies of publications related to this product by calling 1- Turn your printer on and check for a correct POST operation by observing the following: Note the relationship of the parts. Perform the “Paper Feed Service Check” on page Slide the right side frame off the back plate. A two pin jumper is also available in the parts packet, 13B When reinstalling the caps, be sure the cap jetpginter positioned with the locking tabs to the left and sdries before pushing them down on their mounting posts.


The error log is especially helpful in diagnosing intermittent or difficult problems. Max Media Size Custom.

Lexmark 7000 Color Jetprinter Ink Cartridges

Pull up the bottom of the edge guides to separate 77000 from the top of the back plate and remove the assembly from the frames. Remove the rubber backer and paper deflector from under the printhead carrier cable. Remove jetpirnter two screws from the right side frame. The shaft should be forward of the tab. Remove the small feed roll shaft. Le caratteristiche di sicurezza di alcune parti non sempre sono di immediata comprensione.

Unplug the power cord before removing any parts.

Lexmark 7000 Color Jetprinter – printer – color – ink-jet

Continue with this Service Check if the symptom does not change. Disconnect the transport motor connector from the system board. Parts Catalog Assembly 1: Check for loose or worn wiper. If you find a shorted pin, replace the motor.

Lexmark Color Jetprinter Ink Cartridges –

Check the maintenance station for worn or broken parts. If an error indicator appears, go to the error indicator table and take the indicated action for that error. Remove the carrier frame assembly. The print cartridges contain single-unit customer- replaceable supply items.


The test begins when the Power Button is pressed.

To run tine test: Researchers find way to track ‘untraceable’ 3D-printed guns The 3D-printer leaves a hardware fingerprint. Be sure the parallel connector snaps do not get trapped behind the cover. Printer Media Media Load Type.

Spread the right side frame apart far enough to allow removal of the exit drive belt. Printers by Rick Broida Oct 16, Maintenance Wipers and Caps Removal 1. Dual printheads provide jetprintet and true black printing without changing printheads.

Slide the printer off the base cover. Also check the cable for damage.