Szabocls Illes March 11, at 4: Hi Andreas, Could you add support for If so, I would start with the first patched ROM the one that sets df[1: This seems to put the controller in AHCI mode. Dmitry November 16, at 8: If you are using it for passthrough and cannot access your disks anymore then please see this comment.
|Date Added:||28 July 2007|
|File Size:||19.60 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
I’ve got another nVidia one for you: Is there any disadvantages to updating rather than installing cleanly?
I’m asking because I have a board with 2x Marvell controller and it seems there are no devices detected. The thing is that the manul says that it needs to use the chipset Marvell – “88SE”.
JMicron JMB36X SATA Controller Driver Driver – TechSpot
Hi people, I contacted Asrock and explained the ocntroller to them. The last byte of the file is used as a checksum. Anonymous November 13, at It should enable support for this adapter. Option ROM sets this to either 0xf1 or 0x Andreas Peetz November 13, at 9: Thanks in advance –Robert.
Dmitry, see my comment here. Any suggestions on getting this working would be greatly appreciated!
Googling these drives everyone seems to be having trouble. Anonymous November 19, at 2: Actually, there is only one sata connexion, not two.
I would try to re-enable it to see if disks show up, but unfortunately without it disabled I get a PSOD on boot… It seems I’m stuck on both ways! I’m currently at the beginning of my investigations so I’m not sure if it’s a problem of the ISO image I created thanks to your tool, a problem ahcci the board or with the detection of the drive itself. Dmitry November 16, at 5: These functions are disabled in the PCIe capability of the Marvell controller.
Gutharius February 20, at 8: Dmitry Glebov November 11, at 2: Anonymous December 8, at 8: Anonymous November 16, at 6: Can you let me know when you have a new version of the package scheduled?
Your updates worked wonderfully on my system, and I coupled this package with the PowerCLI instructions to add support for my on-board network adapter, and everything is working wonderfully! You may find instructions about how to modify the package yourself and the tools for it at the ESXi5 Community Packaging Tools project page.
The sum of all bytes in the file should be 0x Anonymous January 4, at 2: Unfortunately none of the connected disks are displayed! Andreas Peetz November 7, at 8: Hi Jay, you probably have already installed the package before!?
JMicron JMB Add-on Card AHCI mode « Blog
I disabled the remapping and rebooted but it did not help me. Final configuration PATA not enabled because turning it on causes a hang during boot. Please jmicroh my entire post again, especially the first item of the section “Read before commenting”